Mr. HuWhat can I do for you?
Shenzhen Adela Technology Co., Ltd.
Product Categories
(Total 20 Products for 16 Channels Cwdm Mux And Demux)
Model No.: CWDM-4
4 channels CWDM Mux Demux modules can be used to increase bandwidth on existing fiber infrastructure and alleviate fiber exhaustion The modules provide scalable bandwidth of up to 10Gbps per channel over existing fiber links and are plug and play requiring no configuration of CWDM components Four channel CWDM Mux...
16 channels CWDM MUX and DEMUX module type
Model No.: CWDM-16
16 channels CWDM systems use filters to provide 20nm spacing for up to 16 separate wavelengths colors to be transmitted over a pair of fibers A 16 channel CWDM Mux Demux module has an operating wavelength of 1300nm 1620nm and a center wavelength of 1310nm 1610nm The modules are plug and play and can be used to...
Hybrid cable with1x2.0mm LC/APC-LC /APC SM SX termination and 2x16AWG nonterminated
Model No.: HC16LCA1SM
Hybrid cable with1 2 0mm LC APC LC APC SM SX termination and 2 16AWG nonterminated Conductor 16AWG PVC Insulation thicknees 0 25mm OD over insulation 2 0mm
2.5G SFP L16.2 STM16 1550nm 80km Optical Transceiver
Model No.: SFP-2.5GBE-ZR
The 2 5G SFP L16 2 STM16 Optical Transceiver is used for FTTA with a high performance and cost effective Dense Wavelength Division Multiplexing SFP transceiver module for SDH STM 16 SONET OC 48 and 2x Fibre Channel long reach LR 1 application The DWDM 2 5Gbps SFP module provides a high capacity high bandwidth...
2.5G SFP L16.1 STM16 1310nm 40km Optical Transceiver
Model No.: SFP-2.5GBE-ER
The 2 5G SFP L16 1 STM16 Optical Transceivers are high performance cost effective modules supporting dual data rate of 2 488Gbps and 40km transmission distance with SMF The transceiver consists of three sections a DFB laser transmitter a PIN photodiode integrated with a trans impedance preamplifier TIA and MCU control...
10G SFP+ CWDM 40km Optical Transceiver
Model No.: SFP-10GBE-CWDM40
The 10G SFP CWDM Optical Transceiver is 10Gbps CWDM enhanced small form factor pluggable SFP Optical Transceiver compatible with 10G ETHERNET It is suitable for Singlemode Fiber SMF communications The 10G SFP CWDM Optical Transceiver is Class 1 Laser Products comply with FDA regulations Meet Class 1 eye safety...
10G SFP+ CWDM 60km Optical Transceiver
Model No.: SFP-10G-CWDM60
The 10G SFP CWDM Optical Transceiver is 10Gbps CWDM enhanced small form factor pluggable SFP Optical Transceiver compatible with 10G ETHERNET up to 60km transmission distance It is suitable for Singlemode Fiber SMF communications The 10G SFP CWDM Optical Transceivers are Class 1 Laser Products comply with FDA...
10G SFP+ CWDM BIDI 60km Optical Transceiver
Model No.: SFP-10GBE-BIDI60
10G SFP CWDM BIDI Optical Transceiver is designed for single fiber transmission up to 60km distance the CWDM BIDI SFP Optical Transceiver must be used for the FTTH project which has only one fiber available Enhanced small form factor pluggable SFP transceivers compatible with 10G ETHERNET It is suitable for Singlemode...
10G SFP+ CWDM BIDI 40km Optical Transceiver
Model No.: SFP-10GBE-BIDI40
10G SFP CWDM BIDI Optical Transceiver is designed for single fiber transmission up to 40km distance the CWDM BIDI SFP Optical Transceiver must be used for the FTTH project which has only one fiber available Enhanced small form factor pluggable SFP transceivers compatible with 10G ETHERNET It is suitable for Singlemode...
16G SFP28 SR 100m Optical Transceiver
Model No.: SFP-16GBE-SR
16G SFP28 Optical Transceiver is designed for use in Fibre Channel links up to 14 025 Gb s data rate over Multimode Fiber They are compliant with FC PI 5 Rev 6 00 SFF 8472 Rev 11 0 and SFF 8081 and compatible with SFF 8432 and applicable portions of SFF 8431 Rev 4 1 The Optical Transceiver is compliant per the RoHS...
16G SFP28 LR 10km Optical Transceiver
Model No.: SFP-16GBE-SRL
16G SFP28 Optical Transceivers are designed for use in Fibre Channel links up to 14 025 Gb s data rate and up to 10 km length They are compliant with FC PI 5 Rev 6 10 and SFF 8472 Rev 11 and SFF 8081 They are compatible with SFF 8432 and applicable portions of SFF 8431 Rev 4 1 The Optical Transceiver is compliant per...
100G QSFP28 CWDM4 2km Optical Transceiver
Model No.: QSFP-100GBE-CWDM4
100G QSFP28 CWDM4 Optical Transceiver is designed for use in 100 Gigabit Ethernet links on up to 2km of Singlemode Fiber It is compliant with the 1000GBASE CWDM4 MSA standard The Optical Transceiver converts 4 inputs channels ch of 25Gb s electrical data to 4 CWDM optical signals and multiplexes them into a single...
10G SFP+ CWDM BIDI 80km optical transceiver
Model No.: SFP-10GBE-BIDI80
10G SFP CWDM BIDI Optical Transceiver is designed for single fiber transmission up to 80km distance the CWDM BIDI SFP module must be used for the FTTH project which has only one fiber available Enhanced small form factor pluggable SFP Optical Transceivers compatible with 10G ETHERNET It is suitable for Singlemode...
10G SFP+ CWDM 80km Optical Transceiver
Model No.: SFP-10GBE-CWDM80
The 10G SFP CWDM Optical Transceiver is 10Gbps CWDM enhanced small form factor pluggable SFP Optical Transceivers compatible with 10G ETHERNET up to 80km transmission distance It is suitable for Singlemode Fiber SMF communications The 10G SFP CWDM Optical Transceivers are Class 1 Laser Products comply with FDA...
Model No.: DWDM-MCh
We make full range of DWDM products including 50Ghz 100Ghz and 200Ghz Due to our rich experience of manufacturing we make DWDM with extremely low loss and high stability and reliability Different packages and customized package can be offered with request Common DWDM products package include bare single DWDM device...
Hybrid cable with copper and fiber optic
Model No.: HC-2104B6
The Hybrid cable is designed with copper power cable and fiber optic cable together so it is one time for FTTA wiring save a lot labor cost Application 1 Adapted to Outdoor distribution 2 Access network and local network in high electromagnetic interfering places 3 Adapted to trunk power transmission system 4 FTTA...
Hybrid cable with copper cable and 2-24fibers
Model No.: HC-31224B6
The Hybrid cable is designed with copper power cable and fiber optic cable togther Application 1 Adapted to Outdoor distribution 2 Access network and local network in high electromagnetic interfering places 3 Adapted to trunk power transmission system 4 FTTA Technical Parameters Construction of optical fiber cable
4-16 channels rackmount CWDM MUX and DEMUX
Model No.: CWDM-4
CWDM products include bare single CWDM device packed in glass tube or stainless steel tube CWDM Mux Demux modules packed in ABS box up to 16 channel or even 18 channel Multiplexing on a single fiber or CWDM modules packed in standard 19 1U rackmount Due to the low insertion loss is needed in WDM networks we can also...
8 channels CWDM MUX and DEMUX module type
Model No.: CWDM-8
8 channels CWDM Mux Demux modules require no configuration of CWDM components and provide scalable bandwidth of up to 10Gbps per channel over existing fiber links 8 channels CWDM Mux Demux modules have a CWDM operating wavelength of 1460nm 1620nm and a CWDM center wavelength of 1470nm 1610nm and 1310nm OSC for remote...
1:16 PLC splitter with SC APC connector
Model No.: PLC-16-SC
The 1 16 PLC splitter is with one input and 16 output ports which suitable for 16 endusers for one fiber in FTTH project The laser signal is devided equally to 16 different channel with SC connector so we must have excellent performance for optical splitters and SC connectors with low insertion loss and low PDL PLC...
Review
Tamaki Komatsuzaki
Mar 28, 2021
4
Edward Celkis
Mar 07, 2021
5
Darya Kovalyova
Mar 04, 2021
4
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
